How to get text portion ("Mpps") recognized by TB in "66Mpps" ناشر الموضوع: pjg111
|
|---|
pjg111 
Local time: 19:56
أنجليزي إلى فرنسي
Hi everybody,
What would the proper syntax be to get the "Mpps" portion recognized by the TB when it is stuck to the preceding figures like in
"66Mpps".
Very often English source text writers concatenate figures and measurement units into one single word and I would like the measurement unit portion to be recognized by the TB and shown in the TB list.
Many thanks in advance for any help.
Cheers.
Patrick
| | | | CD_Schuster
ألمانيا
Local time: 19:56
ألماني إلى أنجليزي
+ ...
| Auto-translation should do the job | Apr 24, 2016 |
Hi Patrick,
I believe this is something for which the "Auto-translation" feature is better suited.
(In case you are unfamiliar with auto-translation rules, see http://kilgray.com/memoq/2015/help-full-en/index.html?edit_auto_translatables.html for instructions on how to set them up.)
The following rule should work for... See more Hi Patrick,
I believe this is something for which the "Auto-translation" feature is better suited.
(In case you are unfamiliar with auto-translation rules, see http://kilgray.com/memoq/2015/help-full-en/index.html?edit_auto_translatables.html for instructions on how to set them up.)
The following rule should work for your example (replace targetterm with your desired translation):
Auto-translation rule: Mpps
Replace order rule: targetterm
Now you should receive green entries in the Translation results list for every occurence of "Mpps" with "targetterm" as the suggested translation, even with a random number directly preceding it.
If the measurement unit is the same in the source and target language, you could use a "Non-Translatable" list as an alternative to the above.
Hope this helps!
Greetings,
Christopher
[Edited at 2016-04-24 15:14 GMT] ▲ Collapse
| | | | pjg111
Local time: 19:56
أنجليزي إلى فرنسي
بادئ الموضوع | "Mpps" was just an example. I'm in search of a method for any measurement unit concatenated | Apr 25, 2016 |
Hi Christopher,
Thank you so much for your help.
Unfortunately I would like to find a generic method for any strings such as
100Mpps
50cm
2.5mm
25lb
and so on which have in common measurement unit concatenated with the preceding figures.
I'm not sure such a method is available.
Cheers.
Patrick
| | | | | Use autotranslation rules | Apr 25, 2016 |
Hello Patrick,
There is no way to display these as term hits.
You should use customized autotranslation rules with custom lists. In the autotranslation rule, you need to switch to Translation Pairs tab and set up a list called something like #units#, then add all the possible units of measurements with their translations (or use the original text on the destination side). In the Replace Order Rules column, refer to the translation of the captured unit by the ordinal pos... See more Hello Patrick,
There is no way to display these as term hits.
You should use customized autotranslation rules with custom lists. In the autotranslation rule, you need to switch to Translation Pairs tab and set up a list called something like #units#, then add all the possible units of measurements with their translations (or use the original text on the destination side). In the Replace Order Rules column, refer to the translation of the captured unit by the ordinal position syntax (e.g. $9).
Here's an example
Autotranslation rule: (?<!(,|\.|\d|\d\s|\d'|\d’))([-|\u2212]?[\d]{1,3})(?:\.|,|\s|'|’)(\d\d\d)(?:\.|,|\s|'|’)?(\d\d\d)(?!([,\.\s'’]\d|[/.,](-|--|–)|\d))[\u0020\u00A0]?(#units#)\b
Replace order rule: $2 $3 $4 $9
This autotranslation rule will recognize certain types of numbers where the number is separated from the unit of measurement by a space, non-breaking space or nothing (as in your case), and offer the automatic translation of that number together with the unit of measurement so that the translation of the unit of measurement is separated from the last digit by a non-breaking space.
Obviously, you will need to update the list of units of measurement every time you encounter a new one.
Best regards,
Stanislav ▲ Collapse
| | |
|
|
|
pjg111
Local time: 19:56
أنجليزي إلى فرنسي
بادئ الموضوع | Thanks again to Christopher and Stanislav | Apr 25, 2016 |
Hi, Stanislav,
Thanks for your explanation. It meets Christopher's. I will look into the matter as soon as I can.
Cheers.
Patrick
| | | | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » How to get text portion ("Mpps") recognized by TB in "66Mpps" | Anycount & Translation Office 3000 | Translation Office 3000
Translation Office 3000 is an advanced accounting tool for freelance translators and small agencies. TO3000 easily and seamlessly integrates with the business life of professional freelance translators.
More info » |
| | Trados Studio 2022 Freelance | The leading translation software used by over 270,000 translators.
Designed with your feedback in mind, Trados Studio 2022 delivers an unrivalled, powerful desktop
and cloud solution, empowering you to work in the most efficient and cost-effective way.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
