Glossary entry (derived from question below)
English term or phrase:
tooth pitch
Arabic translation:
عدد الشفرات لكل بوصة / عدد الأسنان في البوصة الواحدة
Added to glossary by
Morano El-Kholy
Nov 22, 2018 18:22
5 yrs ago
2 viewers *
English term
tooth pitch
English to Arabic
Tech/Engineering
Materials (Plastics, Ceramics, etc.)
Window & Contingent Premi
Its fine tooth pitch cuts materials of all common thicknesses.
Proposed translations
(Arabic)
3 | عدد الشفرات لكل بوصة / عدد الأسنان في البوصة الواحدة | Morano El-Kholy |
4 | خطوة السن | Khaled Chouchan |
Change log
Nov 27, 2018 09:53: Morano El-Kholy Created KOG entry
Proposed translations
31 mins
Selected
عدد الشفرات لكل بوصة / عدد الأسنان في البوصة الواحدة
Tooth pitch
Choice of tooth pitch, known also as TPI – teeth per inch = number of teeth per inch, is essentially dependent on the workpiece dimensions. Band saw blades with coarse toothing for cutting of large diameters. For worpieces, their diameter is small or for profiles, blades with more fine tooth pitch must be used, so that at lease 2 teeth are in the cut at the same time. The less number of teeth in the cut, the more cutting performance. The reason is that pressure distribution on less teeth means better ability for the teeth to get into the material. Soft materials as aluminium or bronze need enlarged space for chip removal. Otherwise it will cause its cumulation which will negatively effect on the surface quality.
https://www.pilanametal.com/tooth-pitch.html
**************************************
http://www.jalalalhajabed.com/mechanic-Eng-Arab-dic.pdf
***********************************************
والله أعلم
Choice of tooth pitch, known also as TPI – teeth per inch = number of teeth per inch, is essentially dependent on the workpiece dimensions. Band saw blades with coarse toothing for cutting of large diameters. For worpieces, their diameter is small or for profiles, blades with more fine tooth pitch must be used, so that at lease 2 teeth are in the cut at the same time. The less number of teeth in the cut, the more cutting performance. The reason is that pressure distribution on less teeth means better ability for the teeth to get into the material. Soft materials as aluminium or bronze need enlarged space for chip removal. Otherwise it will cause its cumulation which will negatively effect on the surface quality.
https://www.pilanametal.com/tooth-pitch.html
**************************************
http://www.jalalalhajabed.com/mechanic-Eng-Arab-dic.pdf
***********************************************
والله أعلم
2 KudoZ points awarded for this answer.
Comment: "المسافة بين الأسنان "
21 hrs
خطوة السن
Note from asker:
المسافة بين الأسنان |
Something went wrong...